FREE REGULAR SHIPPING UP TO 35K
FiiO JD7
9.2mm Dynamic Driver In Ear Earphone
Dual magnetic circuit dynamic driver in a dual-layer housing, internal and external magnetic circuitsThe JD7 features a 10mm dynamic driver with an internal and external magnetic circuits setup that greatly...
- IDR 1.499.000
-
- IDR 1.499.000
- Unit price
- per
Subtotal:
IDR 1.499.000
10 customers are viewing this product
Couldn't load pickup availability
1 Tahun Garansi
FREE REGULAR SHIPPING UP TO 35K
Ship in 24 Hours, excepts Pre-Order
Description
xDual magnetic circuit dynamic driver in a dual-layer housing, internal and external magnetic circuits
The JD7 features a 10mm dynamic driver with an internal and external magnetic circuits setup that greatly improves the magnetic flux density so that the driver can push more air for a more effortless sounds. The JD'Js driver is put into a dual-layer housing where each layer features a damping system to better control unwanted vibration and resonances resulting in lower distortion.
More push for better sound, magnetic conductivity enhancer
With the JD7, you can get great sound almost out of any source. Its magnetic conductivity enhancer increases the magnetic flux generated by the drivers to over 1 Tesla.
Good sound from good materials, semi-crystalline PU polymer diaphragm
The JD7 features a polymer diaphragm with a PU gasket, specifically chosen for its unique and favorable characteristics. The PU gives vocals a unique, lush sound. The polymer diaphragm is stiff enough so that there is minimal unwanted vibration and movement during large driver movements, yet is still responsive enough to quickly move according to analog signals as they come.
Tuned with an ear towards enjoyment, frequency response tuned towards Harman curve
The JD7 features a frequency response very close to the Harman curve (In ear 2019) that will please a wide variety of people.
Superior material, 316L stainless steel construction
The JD7 ear units are made of 316L stainless steel. The shells are made of metal powder that goes through injection molding and is sintered at 1000 degrees in a process called metal injection molding.
Specification
The JD7 features a 10mm dynamic driver with an internal and external magnetic circuits setup that greatly improves the magnetic flux density so that the driver can push more air for a more effortless sounds. The JD'Js driver is put into a dual-layer housing where each layer features a damping system to better control unwanted vibration and resonances resulting in lower distortion.
More push for better sound, magnetic conductivity enhancer
With the JD7, you can get great sound almost out of any source. Its magnetic conductivity enhancer increases the magnetic flux generated by the drivers to over 1 Tesla.
Good sound from good materials, semi-crystalline PU polymer diaphragm
The JD7 features a polymer diaphragm with a PU gasket, specifically chosen for its unique and favorable characteristics. The PU gives vocals a unique, lush sound. The polymer diaphragm is stiff enough so that there is minimal unwanted vibration and movement during large driver movements, yet is still responsive enough to quickly move according to analog signals as they come.
Tuned with an ear towards enjoyment, frequency response tuned towards Harman curve
The JD7 features a frequency response very close to the Harman curve (In ear 2019) that will please a wide variety of people.
Superior material, 316L stainless steel construction
The JD7 ear units are made of 316L stainless steel. The shells are made of metal powder that goes through injection molding and is sintered at 1000 degrees in a process called metal injection molding.
Specification
- Wearing style: In-ear
- Frequency response: 20Hz-40KHz
- Driver: Dynamic driver
- Impedance: 32 Ohm
- Sensitivity: 108db/mW@1kHz
- Max input power: 100mW
- Cable: Monocrystalline silver-plated copper
- Cable length: => 120cm
- Unit weight: => 8.3g (without cable)
Related Products
Recently Viewed Products
- Choosing a selection results in a full page refresh.