BEBAS ONGKIR REGULER UP TO 35K
Topping D90 III Sabre
Bluetooth 5.1 Fully Balance DAC Amplifier
Two ES9039SPRO chipsEach of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR, greater dynamic range, and lower distortion compared to the D90SE.Brand new I/V conversionA...
- IDR 14.385.000
-
- IDR 14.385.000
- Harga satuan
- per
Subtotal:
IDR 14.385.000
Ini perkiraan kasar. Itu dapat berubah tanpa pemberitahuan sebelumnya.
10 orang melihat produk ini
Tidak dapat memuat ketersediaan pengambilan
1 Tahun Garansi
BEBAS ONGKIR REGULER UP TO 35K
Dikirim dalam 24 Jam, Kecuali barang Pre-Order
Description
xTwo ES9039SPRO chips
Each of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR, greater dynamic range, and lower distortion compared to the D90SE.
Brand new I/V conversion
A brand new I/V conversion circuit is designed for better quality audio reproduction. The new circuit design provides lower distortion and lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip.
LDAC wireless available
D90 III SABRE is equipped with QCC5125 and Bluetooth 5.1, supports LDAC/aptX-Adaptive/aptX-HD/AAC/SBC. It can support up to 96kHz/24bit, so that high-quality audio can be trans- mitted wirelessly to obtain music experience beyond CD level.
Plug and play
D90 III SABRE has a wide range of compatibility and apply to various op- erating systems such as Windows 10, Windows 11, MAC, Linux and iOS/Android. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 and Thesycon driver (for Windows, other systems without driver). It's stable and reliable.
Choose your output mode at will
D90 III SABRE has balanced XLR output and single ended RCA output. You can choose "XLR only", "RCA only" or "RCA+XLR" output for different applications. In addition to the more universal XLR 4V and RCA 2V outputs, the D90 III SABRE also adds XLR 5V and RCA 2.5V. When XLR 4V and RCA 2V are selected, more devices can be adapted. When XLR 5V and RCA 2.5V are selected, the performance will be pushed from extreme to more extreme.
12V Trigger
The D90 III SABRE is equipped with 12V Trigger input and output, which support being triggered by other devices, as well as actively triggering other devices to switch on and off synchronously.
Each of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR, greater dynamic range, and lower distortion compared to the D90SE.
Brand new I/V conversion
A brand new I/V conversion circuit is designed for better quality audio reproduction. The new circuit design provides lower distortion and lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip.
LDAC wireless available
D90 III SABRE is equipped with QCC5125 and Bluetooth 5.1, supports LDAC/aptX-Adaptive/aptX-HD/AAC/SBC. It can support up to 96kHz/24bit, so that high-quality audio can be trans- mitted wirelessly to obtain music experience beyond CD level.
Plug and play
D90 III SABRE has a wide range of compatibility and apply to various op- erating systems such as Windows 10, Windows 11, MAC, Linux and iOS/Android. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 and Thesycon driver (for Windows, other systems without driver). It's stable and reliable.
Choose your output mode at will
D90 III SABRE has balanced XLR output and single ended RCA output. You can choose "XLR only", "RCA only" or "RCA+XLR" output for different applications. In addition to the more universal XLR 4V and RCA 2V outputs, the D90 III SABRE also adds XLR 5V and RCA 2.5V. When XLR 4V and RCA 2V are selected, more devices can be adapted. When XLR 5V and RCA 2.5V are selected, the performance will be pushed from extreme to more extreme.
12V Trigger
The D90 III SABRE is equipped with 12V Trigger input and output, which support being triggered by other devices, as well as actively triggering other devices to switch on and off synchronously.
Related Products
CSI
CSI
CSI
CSI
CSI
CSI
CSI
CSI
CSI
CSI
Recently Viewed Products
- Jika memilih salah satu, seluruh halaman akan dimuat ulang.